About MyMeter
The system can be used on fir, pine and larch wood.
There are no particular critical issues for use. The most common types of use are CLT, Timber Frame or Frame. It can also be used on solid or laminated beams.
About MyControl CPU
The local WiFi installed in the CPU is “weakened”, to create as little disturbance as possible to other nearby networks. The range of action of the local WiFi is about 10 meters.
The CPU can manage both sensors connected in series via bus cable and wireless sensors in combination.
To block the audible alarm, simply connect via a locally connected device, and silence it using the appropriate icon. In this way, however, it will only block the sound signal, not the red warning triangle of the MyAlarm, nor the sending of the anomaly notification emails.
The audible alarm can be silenced, the visvo alarm will always remain active through MyAlarm and the notification emails.
The system provides for a remote connection via the reserved area on our website www.woodcontrol.eu
If the CPU does not receive at least one signal from one of the sensors installed within 15 hours, the system signals the anomaly as an alarm. The audible alarm, the MyAlarm visual alarm and the notification email are activated.
About sensors
The probes are to be considered as extensions of the sensor, which being housed in an electrical box cannot reach the critical points of the structure.
The MysenseBus sensor has been designed to be installed intuitively and quickly. The positioning of the sensor in the electrical box makes it accessible for maintenance, inspection or replacement.
Once the system has started, the electrical boxes are closed with normal blind plates so as to blend in with the normal electrical sockets present in the finished structure.
The sensor is also equipped with an adjustable temperature probe, 1 meter long to be positioned in contact with the wood, so as to ensure the most accurate possible interpolation of humidity and temperature values.
The connection of the probes to the sensor is fast and unique through plug in connection with diversified terminals to make the connection fast and safe.
About wired sensors (MySenseBus)
MySenseBus is the humidity sensor recommended for new buildings, where the sensors are connected in series to the MyControl CPU control unit via a low voltage cable.
The connection in series between sensors and control unit via the cable guarantees the safety of data transmission, even on long distances, up to 100 meters in length of the bus cable.
The sensors are connected in series to each other and to the control unit by means of a bus cable, supplied with the system. Connection is extremely easy, thanks to spring-loaded terminals that replace approximate contacts or fixings.
The humidity and temperature data are sent once an hour to the control unit, via a low voltage cable. The maximum recommended cable length is 100 meters.
About wireless sensors (MySenseRadio)
MySenseBus is the humidity sensor recommended for new buildings, where the sensors are connected in series to the MyControl CPU control unit via a low voltage cable.
The connection in series between sensors and control unit via the cable guarantees the safety of data transmission, even on long distances, up to 100 meters in length of the bus cable.
The sensors are connected in series to each other and to the control unit by means of a bus cable, supplied with the system. Connection is extremely easy, thanks to spring-loaded terminals that replace approximate contacts or fixings.
The humidity and temperature data are sent once an hour to the control unit, via a low voltage cable. The maximum recommended cable length is 100 meters.
